Car - 1/10 Electric - 4WD Rally - RTR - Lancia 037 EVO 2 Rohrl San Remo 1983
Lancia 037 Rally Gruppo B RTR 1:10 - Amazing reproduction of famous Lancia 037 Rally Car of 1983 in Montecarlo race! It's a Radio Controlled Scale Model based on a 1:10 scale chassis with 4wd transmission. It is ready to run, it's already included in the box the 2.4ghz transmitter, waterproof electronics, with 40 A Speed Control ready for Lipo 2-3s. Steering servo is high quality servo and it has 6kg power. Charger ULTRA UP4PC works with 100-240V current and it can charge Lipo/LiFe/LiHV 2-4s batteries and NiMH/NiCD 4-8 cells batteries. Charge current is settable from 1 to 3 Amperes with 30W power.
Body is already painted with Martini Racing Livery, tires and wheels are scaled from reality! Chassis is the classic The Rally Legends RL004 with aluminium wheel Hex, 6kg steering servo, metal differential gear, metal Cvd, shocks oil and full of ball bearings.
Included in the box:
RTR model with waterproof electronic parts
2.4ghz Transmitter
NiMh Power Pack Battery
100-240v Ultra Power Charger for Lipo/LiFe/LiHV from 2 to 4 cells, NiMH/NiCD from 4 to 8 cells. Charger power settable from 1 to 3 amperes
Car Specifications:
-4WD Chassis
-Center Shaft Drive Transmission
-Adjustable Ball Differentials
-2mm Hex Ball Stud Ends and Screws
-Front Universal Driveshafts
-Realistic Brake Discs and Detailed Wheels & Tyres
-Fully Adjustable Turnbuckles
-Fully Detailed and Painted Body with Decals
-EZpower 23T 540-size Motor
-EZpower 3000mAh NiMH Battery Pack
-20T Motor Limit Electronic Speed Controller
-High-Torque 3Kg Steering Servo
-240V AC Delta Peak 1.8A Smart Charger
Transmitter Specifications:
-2.4GHz Transmitter and Receiver
-15 Models Memory
-Adjustable End Point (EPA)
-Adjustable Anti Lock Brakes (ABS)
-Adjustable Exponential (EXP)
-Servo Reverse
-Built-in Failsafe
-Back Light LCD Display
Required Equipment:
-8 x AA cells for the transmitter
-----------------------------------------------
Overview:
-1/10th scale fully factory assembled chassis, with painted and detailled bodyshell.
-3000mAh battery and Delta Peak charger included.
-Three pieces design plastic tub chassis with shaft drive 4WD.
-Separate moulded differential boxes allowing external adjustability using a 2mm hex driver.
-Front universal driveshafts.
-Ball raced differentials for smooth operation and long life.
-Lightweight plastic outdrives reduce the rotating mass of the drivetrain together with Aluminium "diff saver" rings to prevent widening or possible damage during runs.
-Wheel designs are individual and correct to the particular model vehicle. The wheel axles run in ball bearings and the wheel hexes come complete with cool mock brake discs.
-Fully tuneable chassis set-up allowing adjustable camber, castor, toe-in and roll centers.
-The front and rear shock towers have multiple location holes for the shock absorbers & camber links to allow adjustment of the suspension settings to individual taste and also according to the track conditions. Tension of the front and rear springs (harder springs in the front and softer in the rear) is also adjustable using plastic clips.
-Hassle-free operation, high quality 2.4GHz three channel transmitter with matched receiver complete with built in LCD display! Transmitter features a 15 model memory, adjustable EPA (End Point Adjustment), ABS (Anti-lock Brakes), EXP (Exponential) and Servo Reverse. Built-in adjustable failsafe function to slow the car down in the unlikely event of signal loss.
-Lighting kits also available.
Include:
painted body, Nimh 2000 battery pack with Xt60 connector and fast peak charger 220v.
